|
|
 Idler, Pitman Arms, and Tie Rods 93 Runner
#948208
06/04/09 10:43 PM
|
Joined: Dec 2004
Posts: 13
OP
Need a Spot
|
The tire shop says they can't align my truck until my idler arm, pitman arm, and tie rods get replaced...again! I had this done about 4-5 years ago for like $1200. The steering has some play in it so I'm pretty sure the parts need replacing. Are there any heavy duty replacement parts out there that can eliminate this problem? Total Chaos has these parts but how's the quality?
DON'T MOVE!!!...Lemme get the camera!
|
|
|
Re: Idler, Pitman Arms, and Tie Rods 93 Runner
[Re: av8soulfly]
#948210
06/05/09 12:17 AM
|
Joined: Apr 2000
Posts: 4,282
Roll Me Over
|
buy 'em from autozone...
lifetime warranty.
you can do them yourself...
leo d. 90 4runner, v6, auto, WCOR CitB kit, marlin duals, arb rear, tt front 4.88, blah, blah, blah... Pres. of TEAM IFS! and GETTING OFF 4WD Club member
|
|
|
Re: Idler, Pitman Arms, and Tie Rods 93 Runner
[Re: ldivinag]
#948211
06/13/09 09:47 PM
|
Joined: Sep 2004
Posts: 43
Getting the Wheeling Fever
|
Doing mine next week-end on my T. all the parts will run $250 + or -.Priced the parts for my 90 4runner and prices were about the same.
|
|
|
Re: Idler, Pitman Arms, and Tie Rods 93 Runner
[Re: mrvoodoodaddy69]
#948212
06/14/09 06:21 AM
|
Joined: Jan 2001
Posts: 11,595
Forum Moderator
|
Priced the parts for my 90 4runner and prices were about the same. Because the 4Runner and T100 have the same front suspension! Parts are the same for both!
|
|
|
Re: Idler, Pitman Arms, and Tie Rods 93 Runner
[Re: Adam F]
#948213
06/24/09 10:13 PM
|
Joined: Sep 2004
Posts: 43
Getting the Wheeling Fever
|
I thought the same, but at autozone the part numbers are different for the idler arm and the inner tie rod. i didnt have them pull both to compare. it was hard enough to convince them that one of the outers the had given me was the wrong one. one had male threads the other had female threads. was told they were different manufacturers. i told them that was fine with me but they were still not the same parts
|
|
|
Re: Idler, Pitman Arms, and Tie Rods 93 Runner
[Re: Adam F]
#948214
06/25/09 05:26 PM
|
Joined: Aug 2003
Posts: 2,854
Roll Me Over
|
Priced the parts for my 90 4runner and prices were about the same. Because the 4Runner and T100 have the same front suspension! Parts are the same for both! Not exactly. The t100 is wider.
89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
|
|
|
Re: Idler, Pitman Arms, and Tie Rods 93 Runner
[Re: Greg_Canada]
#948215
06/25/09 08:56 PM
|
Joined: Jan 2001
Posts: 11,595
Forum Moderator
|
True. I went on one site, and they gave the same part number. I went to autzone and they gave different ones.
|
|
|
|
