Clutch pedal bracket SPRING question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Clutch pedal bracket SPRING question [Re: Bill_R] #948420 06/07/09 01:02 PM

Joined: Jun 2005

Posts: 447

Orange, VA

eleet

Mudrunner

I agree with Bill, because when you open the screw to bleed the clutch, the pedal stays on the floor.

All I have to add is that if you are feeling cheap, the dealer has rebuild kits for both the master and slave, they are shown in the toyodiy diagrams.

Entire Thread
Subject	Posted By	Posted
Clutch pedal bracket SPRING question	bradf	06/06/09 11:50 PM
Re: Clutch pedal bracket SPRING question	Bill_R	06/07/09 04:44 AM
Re: Clutch pedal bracket SPRING question	eleet	06/07/09 01:02 PM
Re: Clutch pedal bracket SPRING question	Greg_Canada	06/08/09 06:34 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.496s Queries: 16 (3.494s) Memory: 0.5989 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-06-20 11:38:06 UTC
Valid HTML 5 and Valid CSS