deckplate mod

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

deckplate mod #949264 06/14/09 01:29 AM

Joined: Sep 2007

Posts: 179

toyT100

Wheeler

So I did the deck plate mod today..sort of. I cut a 3 1/2" hole in the front of the air box and left it open. Exhaust is actually not louder, but more quiet. Torque is def up both low end and higher RPMs. Also gas mileage so far is better.

Entire Thread
Subject	Posted By	Posted
deckplate mod	toyT100	06/14/09 01:29 AM
Re: deckplate mod	Kookadala	06/15/09 06:53 PM
Re: deckplate mod	twholland	06/23/09 03:30 AM
Re: deckplate mod	toyT100	06/28/09 07:00 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.527s Queries: 15 (3.525s) Memory: 0.5984 MB (Peak: 0.6313 MB) Data Comp: Off Server Time: 2026-06-08 12:58:38 UTC
Valid HTML 5 and Valid CSS