Welcome to the wire. You'll def find most of your questions here. Of course we do encourage searching first, but can be tricky to use it the first few times. As mentioned below, Reuben made his own blocks, or you can order them from Roger Brown. I have an album with pics and steps of the body lift I did. When the time comes, we'll give you more detail.

Alot of guys with the Gen II's are starting to go with 35" tires. But I wouldnt recommend this unless you plan on getting new gears sometime in the next year or so, could be alot of work for a tranny with only a 4.22 ratio. Those gears can be found in Monteros at junk yards. There are certain years and models that you can get them out of or you can buy it from the dealer and pay close to $800.

As for suspension lifts, I have a JAOS Battlez lift, not sure if they still make it, probably do, but I got mine 9 yrs ago. There are other companies out there that make a coil for the rear, but some sag over a few years so search that or ask around cause I dont know much more about the other coils out there on the market. The front suspension, all you have to do is crank the torsion bar and trim your bump stops. Best of luck <img src="/forums/images/graemlins/kewl.gif" alt="" />

Angelo