Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
H3 wheels and tires on 1st generation Trooper? #950032 06/18/09 10:06 PM
Joined: Jan 2003
Posts: 90
JohninLV Offline OP
Getting the Wheeling Fever
Will they fit? any one seen it done? Looking at a set for my on road cruiser, Trooper no.3 now.

Thanks


3 90 Trooper V-6's, 5 speed, 4.3L TBI, 31" BFG AT's, Fender Flairs, Bored intake, 1.6 roller rockers, MSD Coil, Jacobs Omni ignition. Heavy duty torsion bars, Rancho 9000 Shocks CAN'T SPELL, TO OLD TO LEARN, GOD BLESS YOU IF YOU CAN.
Re: H3 wheels and tires on 1st generation Trooper? [Re: JohninLV] #950033 06/19/09 01:12 AM
Joined: Apr 2000
Posts: 7,268
mlclark Offline
Isuzu Moderator
*****
It seems the bolt pattern will work, but they seem to be deeply backspaced. I would worry about them causing problems when the steering is at full lock.

m








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.008s Queries: 15 (0.006s) Memory: 0.5857 MB (Peak: 0.6337 MB) Data Comp: Off Server Time: 2026-10-24 16:52:39 UTC
Valid HTML 5 and Valid CSS