Crankshaft Holder

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Crankshaft Holder #951122 06/26/09 09:49 AM

Joined: Jan 2008

Posts: 8

australia

rognik39

Need a Spot

Rodeo V6 3.2l

Hi All

Can anyone advise of an alternate tool or method to remove a crankshaft pulley.

GM instructions are to use a crankshaft holder 5-8840-0133-0 which is a Kent Moore Pulley Holder J-8614-01

Need info for the morning

Thanks

Entire Thread
Subject	Posted By	Posted
Crankshaft Holder	rognik39	06/26/09 09:49 AM
Re: Crankshaft Holder	boritz	06/26/09 10:05 AM
Re: Crankshaft Holder	rognik39	06/27/09 12:48 AM
Re: Crankshaft Holder	boritz	06/27/09 02:03 AM
Re: Crankshaft Holder	bamashooter	06/27/09 02:23 AM
Re: Crankshaft Holder	Chad Hunter	07/01/09 01:06 AM
Re: Crankshaft Holder	AIR AMIGO	07/01/09 09:18 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.661s Queries: 15 (3.659s) Memory: 0.6044 MB (Peak: 0.6374 MB) Data Comp: Off Server Time: 2026-05-31 06:13:27 UTC
Valid HTML 5 and Valid CSS