I'd pulled apart the door to replace the master power window switch module, and for convenience when taking the interior panel off, also unplugged the power mirror switch connector.

Both I and the owner have spent hours trying to plug it back together. It's just a regular plastic connector, 7 pins in two rows, similar to must be dozens or hundreds of others on various vehicles over the years.

It seems like the connector type is intended for many more than 7 pins, and is keyed for a slot that isn't used. I could describe the silly thing in exhaustive detail, but my best guess at the moment is that the connectors don't quite match up, and were forced together at the factory (the male end is slightly too wide for the female.) The manual provides pinouts but says nothing else.

Any advice? I mean, I know this problem sounds rediculous, but this isn't my first wiring harness.

Thanks,

-Alex
'97 T100 4x4 5-speed, stock
Lots of desert pinstriping