Gen 3 Skid

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Gen 3 Skid [Re: Mad_Scientist] #952168 07/04/09 07:35 AM

Joined: Aug 2005

Posts: 826

Johnson City, TN

icysyrup

Rock Warrior

Thanks Angelo,

ya the plasma has been a great investment. With that and a welder you can do a lot of building pretty easily.

03 Montero XLS, OME 2"suspension lift,Full skid plates, Extended Diff/transfer breathers. 34 LTB's, Winch w/syn rope, Locked front/rear.

Entire Thread
Subject	Posted By	Posted
Gen 3 Skid	icysyrup	07/03/09 11:50 PM
Re: Gen 3 Skid	Mad_Scientist	07/04/09 12:15 AM
Re: Gen 3 Skid	icysyrup	07/04/09 12:50 AM
Re: Gen 3 Skid	Angelo	07/04/09 04:27 AM
Re: Gen 3 Skid	Mad_Scientist	07/04/09 04:31 AM
Re: Gen 3 Skid	icysyrup	07/04/09 07:35 AM
Re: Gen 3 Skid	Oyaji_Jon	07/04/09 08:23 AM
Re: Gen 3 Skid	Mad_Scientist	07/04/09 12:05 PM
Re: Gen 3 Skid	icysyrup	07/04/09 01:51 PM
Re: Gen 3 Skid	ES_97Sport	07/05/09 08:42 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.476s Queries: 16 (3.474s) Memory: 0.6119 MB (Peak: 0.6449 MB) Data Comp: Off Server Time: 2026-06-04 21:31:34 UTC
Valid HTML 5 and Valid CSS