I just noticed that you made two of the mounting holes open. Is that so you can just loosen those bolts and only remove the two at the other end? That would make removal and refitting so much easier as one end would always be held in position on the loosened bolts while you install the other two bolts (or something like that...still half asleep <img src="/forums/images/graemlins/lol.gif" alt="" />). Good thinking <img src="/forums/images/graemlins/kewl.gif" alt="" />

'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...