|
|
|
|
 Gen 1 Troop rear leaf options?
#952546
07/07/09 07:33 AM
|
Joined: Jul 2005
Posts: 141
OP
Wheeler
|
Is there another vehicle we can readily use rear spring packs from? The rear of my trooper rides about 1 or 2 inches lower than the stock front height.
Looking for a stock height to 2" higher but don't really want to pay all that money for an old man emu set.
Let me know what you diy guys have come up with.
Thanks
Mike
89 v6 Raider 5spd
89 v6 Montero auto
86 TD Trooper
|
|
|
Re: Gen 1 Troop rear leaf options?
[Re: mike71800b]
#952547
07/08/09 04:23 AM
|
Joined: May 2009
Posts: 2
Need a Spot
|
I used an add- a-leaf from Skyjacker and 2" longer shackles.The laef kit was listed for a 1988 Toyota PU it is an exact match except it uses a 3/8 center bolt instead of the Isuzu 8mm bolt. My trooper rides almost level now and would probaly be a little high in the rear if I took the cargo box out. Dave
Last edited by det; 07/08/09 04:25 AM.
|
|
|
Re: Gen 1 Troop rear leaf options?
[Re: mike71800b]
#952548
07/09/09 06:05 PM
|
Joined: Apr 2003
Posts: 234
Wheeler
|
Give Matt a call at www.independent4x.com and go with OME springs i have them on my 88 t2 and love them, well wurth the money. Don
sua dana 44 conversion 5.38 gears, 4.3tbi,700r,dana 300 w/tera low 4:1 gears
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5935 MB (Peak: 0.6468 MB) Data Comp: Off Server Time: 2026-05-29 15:48:30 UTCValid HTML 5 and Valid CSS