Yeah, I've been looking for parts to fab a hose. I can't find anything that will span the 7" run/3.5" rise with <10 degree offset. All of the elbows are too long and the 2.36" throttle body-side is an odd one to match. So I'm thinking about going your route and sealing it with tape. However, my hose is split so bad, I will need to insert some type of tube to support it. I wonder if I need to use CARB-compliant tape for this repair... Maybe then it will pass inspection?!? <img src="/forums/images/graemlins/shiner.gif" alt="" />

1997 Sportage 4x4, auto-trans, Warn manual hubs, 4" UPYOURKIA front lift, TJ 106AA rear springs, 2-5/8" body lift, 31x10.50 treads, SmittyBilt SRC front and XRC rear bumper, swing-out tire mount, OBX LSD front diff, Track Finder rear locker, 5.38 R&Ps and... really crappy gas mileage! <img src="/forums/images/graemlins/shiner.gif" alt="" />