Mitsu 9" and Ford 9" Compatibility

Print Thread

Rate Thread

Re: Mitsu 9" and Ford 9" Compatibility [Re: 1986powerram50] #953980 07/16/09 06:56 PM

Joined: Sep 2006

Posts: 2,712

East Wallyworld Vermont

OldColt

Roll Me Over

If I were to consider this I would machine up some 31 spline axles to go in there too.
Why keep the 28 spline axles, they are the weak link.
I have a pile of Ford 9" stuff here, just no Mitsu 9" out of the chassis.

Cheers, Charlie
If It ain't broke, Modify it!
87 Montero turbo Converted back in Spring1989
95 Montero SR 3.8 DOHC Only one?
93 Pajero 3 door 6G75 Mivec with paddle shifted 5 speed
Then a Gen2 SR with full coil independent suspension.

Entire Thread
Subject	Posted By	Posted
Mitsu 9" and Ford 9" Compatibility	1986powerram50	07/15/09 11:44 PM
Re: Mitsu 9" and Ford 9" Compatibility	hochkis	07/16/09 12:35 AM
Re: Mitsu 9" and Ford 9" Compatibility	1986powerram50	07/16/09 01:33 AM
Re: Mitsu 9" and Ford 9" Compatibility	hochkis	07/16/09 06:05 AM
Re: Mitsu 9" and Ford 9" Compatibility	desteurm	07/16/09 06:56 AM
Re: Mitsu 9" and Ford 9" Compatibility	LandRaider	07/16/09 07:26 AM
Re: Mitsu 9" and Ford 9" Compatibility	1986powerram50	07/16/09 01:37 PM
Re: Mitsu 9" and Ford 9" Compatibility	OldColt	07/16/09 06:56 PM
Re: Mitsu 9" and Ford 9" Compatibility	desteurm	07/16/09 08:28 PM
Re: Mitsu 9" and Ford 9" Compatibility	LandRaider	07/16/09 10:40 PM
Re: Mitsu 9" and Ford 9" Compatibility	justice	07/16/09 10:52 PM
Re: Mitsu 9" and Ford 9" Compatibility	desteurm	07/17/09 12:20 AM
Re: Mitsu 9" and Ford 9" Compatibility	OldColt	07/17/09 12:29 AM
Re: Mitsu 9" and Ford 9" Compatibility	TOASTY	07/17/09 05:15 AM
Re: Mitsu 9" and Ford 9" Compatibility	desteurm	07/17/09 08:29 PM
Re: Mitsu 9" and Ford 9" Compatibility	1986powerram50	08/16/09 02:59 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: