2.8L remove/replace

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2.8L remove/replace [Re: Ed Mc] #954420 07/19/09 05:56 AM

Joined: Dec 1999

Posts: 1,035

Poulsbo, WA 98370-8125, Kitsap...

Ed Mc

Body Damage is Cool

BTW your motor can be converted into a "3.1 Stroker" with simple addition of any 3.1/3.4/3100/3400 crankshaft and the correct set of pistons (meant for an Iron-Headed 3.1 only). I did that very mod to an '89 2.8 Trooper I built for my Folks.....ed

'90 Troop 3.4 LS
'89 Troop RS (Has Valve Issues, needs Counseling)
HI, I'm Ed and I'm a Trooper-holic!
Keep On Troopin'......

Entire Thread
Subject	Posted By	Posted
2.8L remove/replace	89troop	07/19/09 12:37 AM
Re: 2.8L remove/replace	maxwell417	07/19/09 04:37 AM
Re: 2.8L remove/replace	Ed Mc	07/19/09 05:53 AM
Re: 2.8L remove/replace	Ed Mc	07/19/09 05:56 AM
Re: 2.8L remove/replace	89troop	07/19/09 06:36 PM
Re: 2.8L remove/replace	Ed Mc	07/19/09 11:47 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.883s Queries: 16 (3.880s) Memory: 0.6033 MB (Peak: 0.6362 MB) Data Comp: Off Server Time: 2026-11-14 08:03:33 UTC
Valid HTML 5 and Valid CSS