Valve stem seals

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Valve stem seals #954485 07/19/09 02:30 PM

Joined: Nov 2005

Posts: 43

Omaha, NE

binx

Getting the Wheeling Fever

I have a 94 2.6l with an AMC head and a delta cam. I am on my second set of valve seals since install and am starting to burn oil again in two of the cylinders is there something i am doing wrong that is causing them to get torn up?

2000 amigo ironman, 4" suspension 1" body lift on 33's with 4.77 gears, tera lows, and no-slip locker.

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 2.504s Queries: 14 (0.005s) Memory: 0.5812 MB (Peak: 0.6214 MB) Data Comp: Off Server Time: 2026-07-13 06:06:29 UTC
Valid HTML 5 and Valid CSS