drive belt question 97 rodeo

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: drive belt question 97 rodeo [Re: SOURCE7769] #954620 07/24/09 08:34 AM

Joined: May 2007

Posts: 36

Victoria, Australia

boritz

Getting the Wheeling Fever

1. Yes - you could remove the A/C belt without any worries (except the A/C won't work of course).

2. How are you trying to adjust it? - the adjuster is the idler pulley - there is a 17mm lock-nut in the face of the idler bearing and then the adjustment is done with the long 10mm bolt.

Aussie 1997 3.2V6 SOHC 6VD1 Holden Jackaroo SE (Isuzu Trooper/Bighorn/Monterey) 5-speed manual, rear LSD, front Lokka (manual free-wheel hubs).

Entire Thread
Subject	Posted By	Posted
drive belt question 97 rodeo	SOURCE7769	07/20/09 07:57 PM
Re: drive belt question 97 rodeo	boritz	07/24/09 08:34 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.837s Queries: 16 (3.500s) Memory: 0.5946 MB (Peak: 0.6276 MB) Data Comp: Off Server Time: 2026-06-21 15:11:10 UTC
Valid HTML 5 and Valid CSS