high idle with recent valve cover gasket change

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

high idle with recent valve cover gasket change #955577 07/26/09 01:24 AM

Joined: Jun 2009

Posts: 15

89toy96

Need a Spot

3.4L just changed the valve cover gasket, cleaned the intake, cleaned the MAF. Now it is idleing at 1750. When it was cold it would start at 1500 then start climbing. Any thoughts??? I already disconnected the battery once and just let it sit. The Check engine light was on the first time, but not the second time after i disconnected the battery
Thanks

Entire Thread
Subject	Posted By	Posted
high idle with recent valve cover gasket change	89toy96	07/26/09 01:24 AM
Re: high idle with recent valve cover gasket change	ErikB	07/26/09 03:37 PM
Re: high idle with recent valve cover gasket change	Adam F	07/26/09 08:08 PM
Re: high idle with recent valve cover gasket change	BamZipPow	07/26/09 09:44 PM
Re: high idle with recent valve cover gasket change	89toy96	07/28/09 02:28 AM
Re: high idle with recent valve cover gasket change	kewlynx	07/28/09 07:46 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.450s Queries: 15 (3.447s) Memory: 0.6031 MB (Peak: 0.6360 MB) Data Comp: Off Server Time: 2026-05-29 18:10:31 UTC
Valid HTML 5 and Valid CSS