Grinding - Clunking - and Blinking Lights

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Grinding - Clunking - and Blinking Lights [Re: WigWiggy] #955766 07/29/09 09:39 PM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

See, you found out how to fix it yourself. I think you are dead on, except for the idea on low vac at idle, where engine vac is typically high. I suspect a leaking vac line or a bad solenoid valve, or a sticky acutator gizmo...

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
Grinding - Clunking - and Blinking Lights	WigWiggy	07/27/09 06:25 PM
Re: Grinding - Clunking - and Blinking Lights	WigWiggy	07/29/09 05:47 PM
Re: Grinding - Clunking - and Blinking Lights	fasteddy	07/29/09 09:39 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.477s Queries: 16 (3.474s) Memory: 0.5972 MB (Peak: 0.6302 MB) Data Comp: Off Server Time: 2026-06-16 08:20:16 UTC
Valid HTML 5 and Valid CSS