|
|
|
|
 Output Shaft Seal
#955801
07/28/09 12:08 AM
|
Joined: Feb 2009
Posts: 114
OP
Wheeler
|
I'm looking for an output shaft seal form the front of my truck, dif side (left). It is a 91 Pajero, which typically cross refferences with a 92 Monty. Since I'm up here in Canada and the Gen II was never available up here I'm having trouble tracking down the part number, or the part for that matter. Any help would be appretiated. So far I know this:
Nation Oil Seals part #710213 or maybe 710146 or maybe 710151. The CRH number is 24283. (so basically I don't know the part number)
From what I can tell (based on research) the seal dimensions are:
Shaft 2.441
Bore 3.071
OD 3.08
Width 0.276
If anyone can confirm any of this I'd appreciate it. Right now it's looking like I'll have to put up with the leak and just keep an eye on it. I also have some friends with CAPS that are double checking part numbers for me.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.479s Queries: 15 (3.477s) Memory: 0.5990 MB (Peak: 0.6320 MB) Data Comp: Off Server Time: 2026-06-12 05:58:05 UTCValid HTML 5 and Valid CSS 
