Unfortionatly, the only thing i had were self tapping screws. The body isn't that great anyway. I have to come up with a new camera. I started using a hole saw, but it went dull, so i made a fairly round whole with a sawzal. the inside fender i just cut a big enough portion out to fit the pipe through. I belive the 90 degree goes down through the top of the fender into a run 45. Then i put a short piece of pipe into a rubber union. you can see that in the picture. I used two conduit clamps with the self tappers to secure the outside part.

2001 Sportage, 4" RSG lift, Cragers W/31 10.5 Micky Claws, Warn Manual Hubs, 16 gallon Pro Street Fuel Cell, Custom Snorkel, K&N Filter.
1989 Dodge W250.