ECM failure?

Print Thread

Rate Thread

Re: ECM failure? [Re: fasteddy] #957510 08/05/09 11:04 PM

Joined: Jun 2003

Posts: 7,356

Cleve-burg OH USA

MontyMcV

Trail Leader

Quote

Both the 12v and 24v 3.0 have the terminal on the big harness on the firewall, 24v on the pside IIRC, 12v on the dside.

The 24V has coil packs. So no timing to set, right?

Big Truck: 00, 3.5, Endeavor, 5-Spd drive line in hand!
Little Truck: 87, 2.6T I/C, MT, LSDs, Tonneau Top
Her Truck: 03, 3.8, 20th Anniv, 65k
Daughter's: 06 Eclipse, Keeping it Mitsu!
FSMs: MitsubishiLinks.com

Entire Thread
Subject	Posted By	Posted
ECM failure?	4runnerpilot	08/05/09 06:53 PM
Re: ECM failure?	blinkerbox	08/05/09 07:16 PM
Re: ECM failure?	fasteddy	08/05/09 07:26 PM
Re: ECM failure?	MontyMcV	08/05/09 11:04 PM
Re: ECM failure?	4runnerpilot	08/05/09 11:34 PM
Re: ECM failure?	FrankR	08/06/09 12:49 AM
Re: ECM failure?	89IsMine	08/06/09 01:08 AM
Re: ECM failure?	fasteddy	08/06/09 05:25 PM
Re: ECM failure?	FrankR	08/06/09 06:17 PM
Re: ECM failure?	MarkG	08/06/09 06:33 PM
Re: ECM failure?	FrankR	08/06/09 06:37 PM
Re: ECM failure?	4runnerpilot	08/06/09 07:11 PM
Re: ECM failure?	blinkerbox	08/06/09 08:02 PM
Re: ECM failure?	fasteddy	08/06/09 10:10 PM
Re: ECM failure?	4runnerpilot	08/11/09 01:40 AM
Re: ECM failure?	fasteddy	08/11/09 02:48 AM
Re: ECM failure?	MarkG	08/12/09 04:01 AM
Re: ECM failure?	FrankR	08/05/09 07:31 PM
Re: ECM failure?	4runnerpilot	08/05/09 07:45 PM
Re: ECM failure?	fasteddy	08/05/09 09:11 PM
Re: ECM failure?	FrankR	08/05/09 09:49 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: