1988 Toyota 4X4

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 1988 Toyota 4X4 [Re: Tcloud] #958993 08/15/09 01:43 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Usually the clips are plastic with a pin in the center that pushes in to expand the end of the clip. You need to get something like needle nose pliers to pull that pin out a ways (towards the engine) to release the pressure on the end of the clip.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
1988 Toyota 4X4	Tcloud	08/15/09 12:09 AM
Re: 1988 Toyota 4X4	4Crawler	08/15/09 01:43 AM
Re: 1988 Toyota 4X4	Greg_Canada	08/15/09 02:15 AM
Re: 1988 Toyota 4X4	Tcloud	08/16/09 06:41 PM
Re: 1988 Toyota 4X4	Greg_Canada	08/17/09 03:04 AM
Re: 1988 Toyota 4X4	kewlynx	08/17/09 04:41 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.529s Queries: 16 (3.527s) Memory: 0.6045 MB (Peak: 0.6375 MB) Data Comp: Off Server Time: 2026-06-17 21:13:33 UTC
Valid HTML 5 and Valid CSS