Quote
During our shakedown trip with the Taiga Taco, I noticed the temp guage stayed just about the 1/2 way point. The camper weighs about 1060 lbs, airbags bumped up a tad.

I pulled the camper off, so the RV shop could redo the PO's installation (off kilter), and drove the truck unladen, with the same results; about a needle width past halfway.

I don't know if he put a 195dg t'stat in there; might've. Gets pretty dang cold down in Delta, where I got the truck from.

I also suspect he's mixed green stuff with the Toyota Red, as the truck had just under 42K when I bought it. I'll be doing a flush pretty soon; just wanted to know what you guys were lookin' at with your 3.4's, which is a new mill for me!!

Thanks!

Do you have a scangauge? leave it hooked up and it will tell you your ACTUAL temps, not what the gauge is reading. Mine stays at half or just below as well.
Also, if red+green mix, you'd be in for a rad or HG failure... happened when my cousin sold his taco...


89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim