This little project was prompted by my rear brake line blowing out.

Here is a list of the adapters and fittings I used from Summit Racing:

1x EAR-63010112ERL (Rear Hose)
2x RUS-656242 (Front Hoses)
3x RUS-641411 (10mm to AN3 adapters...these came in pairs)

You may want to verify your hose lengths. The rear hose will likely work better if it had a 90 degree fitting on one end.

Here's a pic of those Summit items, with a closeup of the fittings so you can see how they mount (just like the old hose ends).
As for shots of the actual installation, it was surprisingly difficult to take any good pictures.