Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
carrier bearing 89' 4wd #960209 08/23/09 08:29 PM
Joined: Nov 2007
Posts: 37
W
wheelin34m Offline OP
Getting the Wheeling Fever
my kids carrier bearing (center support/drive shaft bearing) went out yesterday....Do I need to remove the complete drive-line to replace it, or can I just replace the carrier bearing and be done with it?

Re: carrier bearing 89' 4wd [Re: wheelin34m] #960210 08/24/09 09:50 PM
Joined: Apr 2002
Posts: 3,568
Snowtoy Offline
Roll Me Over
You don't have to pull the complete d-line, just the front section.


More than tread lightly. Leave it like you were never there, nor anyone else.
'90 X-cab 4.88's 33 BFG AT's, rr ARB, Headers, Ignition upgrade, cold air induction.
'91 X-cab 5.29's 315's BFG MT's, rr ARB, custom bumper and flatbed

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5836 MB (Peak: 0.6314 MB) Data Comp: Off Server Time: 2026-06-07 13:38:13 UTC
Valid HTML 5 and Valid CSS