any tips on pulling injectors? 22re

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: any tips on pulling injectors? 22re [Re: Greg_Canada] #960658 08/28/09 09:35 PM

Joined: Aug 2003

Posts: 480

Lower Hudson Valley, New York

MAC

Mudrunner

Can you tell me what the details are on the 'splices' ? I am assuming they are close to the connectors? do I take the splices apart? or just clean them up, then solder? Anyone ever take a pic of these things? Is there a discrete piece of shrink insulation over them.. a big bulge or something indicationg where they are?

Entire Thread
Subject	Posted By	Posted
any tips on pulling injectors? 22re	MAC	08/26/09 03:30 AM
Re: any tips on pulling injectors? 22re	suba	08/26/09 03:55 AM
Re: any tips on pulling injectors? 22re	kewlynx	08/26/09 06:13 AM
Re: any tips on pulling injectors? 22re	Greg_Canada	08/26/09 02:30 PM
Re: any tips on pulling injectors? 22re	MAC	08/28/09 09:35 PM
Re: any tips on pulling injectors? 22re	4Crawler	08/28/09 10:23 PM
Re: any tips on pulling injectors? 22re	MAC	08/29/09 04:42 AM
Re: any tips on pulling injectors? 22re	4Crawler	08/29/09 05:23 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.979s Queries: 16 (3.977s) Memory: 0.6067 MB (Peak: 0.6397 MB) Data Comp: Off Server Time: 2026-06-13 17:01:42 UTC
Valid HTML 5 and Valid CSS