|
|
|
|
 Re: Raider V6 Idler pulleys?
[Re: JAVYPRO]
#960676
08/27/09 04:46 PM
|
Joined: Jan 2001
Posts: 13,649
Web Wheeler
|
Goodyear pn 49037 just jumped into my head...
Not responsible for advice not taken...
|
|
|
Re: Raider V6 Idler pulleys?
[Re: fasteddy]
#960677
08/30/09 09:29 PM
|
Joined: Jul 2005
Posts: 141
OP
Wheeler
|
Hey guys, thanks for all the great replys.
Those goodyears look reasonably priced, I always hate going to the stealership....
89 v6 Raider 5spd
89 v6 Montero auto
86 TD Trooper
|
|
|
Re: Raider V6 Idler pulleys?
[Re: mike71800b]
#960678
08/31/09 12:58 AM
|
Joined: Jan 2001
Posts: 13,649
Web Wheeler
|
You also need 5 flat washers sized to fit the center bolt behind the goodyear to space it out far enough. Mine cost me $.60.
Not responsible for advice not taken...
|
|
|
Re: Raider V6 Idler pulleys?
[Re: fasteddy]
#960679
08/31/09 10:39 PM
|
Joined: Jul 2005
Posts: 141
OP
Wheeler
|
No prob, I can lathe up a spacer real quick to bring it back up to spec height.
Thanks for the fore warning.
I might go ahead and print up these dimensions and make some that take like a standard 6xxx series 2rs bearing held in with circlip. I'll create a post if i do so.
Mike
89 v6 Raider 5spd
89 v6 Montero auto
86 TD Trooper
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.007s Queries: 16 (0.004s) Memory: 0.6043 MB (Peak: 0.6758 MB) Data Comp: Off Server Time: 2026-06-01 01:18:18 UTCValid HTML 5 and Valid CSS 