slave cylinder

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: slave cylinder [Re: Lor] #960742 08/26/09 05:36 PM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

Yes, bleed it down to collapse it, then reinstall and top off fluid. May have to bleed off the air afterwards.

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
slave cylinder	Lor	08/26/09 03:54 PM
Re: slave cylinder	fasteddy	08/26/09 05:36 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.684s Queries: 16 (3.501s) Memory: 0.5944 MB (Peak: 0.6274 MB) Data Comp: Off Server Time: 2026-07-16 14:36:35 UTC
Valid HTML 5 and Valid CSS