torsion bar adjustment - stock height measurement?

Print Thread

Rate Thread

Re: torsion bar adjustment - stock height measurement? [Re: Chad Hunter] #961070 08/29/09 09:47 PM

Joined: Dec 2003

Posts: 354

Twin Cities

acy76

Mudrunner

Thanks for the offers and information, guys. I've adjusted the stock bars (33.5" to center of the headlights) and all seems well, so I think I will run it as-is for now. The ride seems good, and once I get the new shocks in, it should be even better.

1988 Isuzu Trooper LS
2.8l Isuzu 4JB1-TC intercooled turbo diesel
www.dieseltrooper.blogspot.com

Entire Thread
Subject	Posted By	Posted
torsion bar adjustment - stock height measurement?	acy76	08/28/09 07:11 PM
Re: torsion bar adjustment - stock height measurement?	Jim_Paget	08/28/09 11:57 PM
Re: torsion bar adjustment - stock height measurement?	acy76	08/29/09 01:18 AM
Re: torsion bar adjustment - stock height measurement?	Jim_Paget	08/29/09 01:23 AM
Re: torsion bar adjustment - stock height measurement?	lttlbddy	08/29/09 04:36 AM
Re: torsion bar adjustment - stock height measurement?	dominic	08/30/09 03:41 AM
Re: torsion bar adjustment - stock height measurement?	Jim_Paget	08/30/09 04:10 AM
Re: torsion bar adjustment - stock height measurement?	dominic	08/31/09 03:39 AM
Re: torsion bar adjustment - stock height measurement?	maxwell417	09/03/09 04:36 AM
Re: torsion bar adjustment - stock height measurement?	Chad Hunter	08/29/09 08:34 PM
Re: torsion bar adjustment - stock height measurement?	acy76	08/29/09 09:47 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social: