Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 3 1 2 3
offset on gen1 running 31x10.5x15's on 15x8 rims? #961123 08/29/09 07:32 PM
Joined: Aug 2009
Posts: 23
W
wugwump Offline OP
Need a Spot
going to be getting some soft 8's in 15x8 from summit, several options with the monty's bold pattern ... what's the offset to use?


91 two-tone LWB 5-speed, sunroof, third row seat, 31" wrangler authority's on black cragar soft 8's.
Re: offset on gen1 running 31x10.5x15's on 15x8 rims? [Re: wugwump] #961124 08/29/09 09:19 PM
Joined: Oct 2008
Posts: 567
K_Raider Offline
Rock Warrior
***
http://www.4x4wire.com/forums/showflat.p...rue#Post1155809

Use the search. Theres tons more. <img src="/forums/images/graemlins/kewl.gif" alt="" />


88 Raider- sitting on a full size Chevy frame with 35.5x11.50x16 Dyna Torque II tractors
89 Montero- stock 2.6 M/T 30-9.50 BFG all terrains on American Racing Wheels
99 2500 Ram- 285-75-16 Uniroyal all terrains,straight pipes with no cat (yes its loud)
Re: offset on gen1 running 31x10.5x15's on 15x8 rims? [Re: wugwump] #961125 08/30/09 01:46 AM
Joined: Feb 2005
Posts: 2,649
Grasscat Offline
Roll Me Over
****
Quote
going to be getting some soft 8's in 15x8 from summit, several options with the monty's bold pattern ... what's the offset to use?


Check the first post on this page.


Michael j

TreadLightly! Trainer

Grasscat III, 1994 Gen 2 Five speed, Stock ( for a little while )

GrassCat II, 1998 Gen 2.5 Locked and loaded. Ran off with Hector.

GrassCat I, 1991 Gen 1 Ran off with Justice.
Re: offset on gen1 running 31x10.5x15's on 15x8 rims? [Re: Grasscat] #961126 08/30/09 04:01 AM
Joined: Jan 2003
Posts: 1,741
powerRam50 Offline
Body Damage is Cool
3.75 back spacing works great.


87 dodge power ram 50,35" tires,5 1/2" total lift,4.6 gears,lockers front and rear,Rancho RS5000's,custom front bumper,custom rock sliders,cct extended diff breathers,75 amp alt(40 amp stock),thorely header,K&N,wheeled hard...
Re: offset on gen1 running 31x10.5x15's on 15x8 rims? [Re: powerRam50] #961127 08/30/09 04:50 AM
Joined: Jul 2009
Posts: 91
S
SandRaider Offline
Getting the Wheeling Fever
Quote
3.75 back spacing works great.


That's what I use, even works with my 35s


Eric
89 Raider V6, 35s, 5sp, welded rear, 8k winch
89 Raider 2.6 going on 84 4runner frame
Re: offset on gen1 running 31x10.5x15's on 15x8 rims? [Re: SandRaider] #961128 08/30/09 05:53 AM
Joined: Jul 2005
Posts: 2,088
DRaider90 Offline
Body Damage is Cool
***
Keep in mind back spacing most greatly helps with the width of tires not the diameter. I have 34x9.5s on stock bs Alloys, but if I had some 15x8s with stock bs and 34x12.5s it wouldn't work more than likely. The diameter of both tires is 34", but its the width that makes the difference.

For that matter 10.5" wide tires will fit with stock back spacing on stock rims. With the wider rims any back spacing 4" and below should be more than enough. 3.75" will more than plenty with enough room to run 12.5s later on.

Last edited by DRaider90; 08/30/09 05:56 AM.

88 Raider(Red):160k-Reman'd 2.6-5spd-Weber-SW Hubs-34x9.5 TSL-OffRd Pkg-1"Tbar-2"BL-CB
88 Raider(Silver):No 2.6/Bad KM145 Parts/Project
88 Montero(Brown):No 2.6,4.88s Parts/Project

[b]4X4 STICKERS,SHIRTS,ETC:
4WD Stickers AT COST.[b]
Re: offset on gen1 running 31x10.5x15's on 15x8 rims? [Re: DRaider90] #961129 09/01/09 06:54 AM
Joined: Jul 2005
Posts: 141
M
mike71800b Offline
Wheeler
Let me know how those summit wheels work out, I have been thinking of a set myself.
The raider i recently bought has 32 x 11.50's on it with what looks like 15 x 12" jc whitney fake beadlock wheels.
The outer edge of the tire is just wide enough to scrub into the plastic bumper end in the front when steered just right. Tire doesn't seem to catch anywhere else when stuffed, and no probs in the rear.
Anyone know if a 15 8 , or a 15 x 10 wheel will allow 32x11.5's without scrubbing? They're Pro Comp tires with 1/2 inch of tread or so left so I'd like to make them work if possible.
THanks!


89 v6 Raider 5spd
89 v6 Montero auto
86 TD Trooper
Re: offset on gen1 running 31x10.5x15's on 15x8 rims? [Re: mike71800b] #961130 09/01/09 07:42 AM
Joined: Jul 2009
Posts: 91
S
SandRaider Offline
Getting the Wheeling Fever
I use 15x8 pro comp rock crawler (looks exactly like cragar soft 8) with 3.75" backspacing. I've ran 31x10.5 tires with no rubbing ever, but my current 35x12.5 tires on those same wheels rubbed when turning before I put the 3" body lift on, then only the driver side rubbed on the inner fender well when turning right, now it doesn't rub at all, even when stuffed, thanks to a big hammer on the inner fender.


Eric
89 Raider V6, 35s, 5sp, welded rear, 8k winch
89 Raider 2.6 going on 84 4runner frame
Re: offset on gen1 running 31x10.5x15's on 15x8 rims? [Re: mike71800b] #961131 09/01/09 08:04 AM
Joined: Jul 2005
Posts: 2,088
DRaider90 Offline
Body Damage is Cool
***
Quote
Let me know how those summit wheels work out, I have been thinking of a set myself.
The raider i recently bought has 32 x 11.50's on it with what looks like 15 x 12" jc whitney fake beadlock wheels.
The outer edge of the tire is just wide enough to scrub into the plastic bumper end in the front when steered just right. Tire doesn't seem to catch anywhere else when stuffed, and no probs in the rear.
Anyone know if a 15 8 , or a 15 x 10 wheel will allow 32x11.5's without scrubbing? They're Pro Comp tires with 1/2 inch of tread or so left so I'd like to make them work if possible.
THanks!


15x8s are the widest wheel you should run 11.5" wide tires on. Running them on 15x10"s or 15x12"s is asking to pop beads. You should be fine with the 32x11.5s mounted on 15x8s.


88 Raider(Red):160k-Reman'd 2.6-5spd-Weber-SW Hubs-34x9.5 TSL-OffRd Pkg-1"Tbar-2"BL-CB
88 Raider(Silver):No 2.6/Bad KM145 Parts/Project
88 Montero(Brown):No 2.6,4.88s Parts/Project

[b]4X4 STICKERS,SHIRTS,ETC:
4WD Stickers AT COST.[b]
Re: offset on gen1 running 31x10.5x15's on 15x8 rims? [Re: powerRam50] #961132 12/14/09 10:59 PM
Joined: Mar 2006
Posts: 749
M
MI_Mitsu Offline
Rock Warrior
***
Quote
3.75 back spacing works great.


Good to hear - especially since the wheel FAQ shows a 15x8 needs a 3.25 backspace.

Can anyone vouce for the min and max backspace limits for a 15x7 and a 15x8 wheel?

Jim


89 Montero LS 3.0L/Auto
90 MightyMax 2.4L/Man

Parted/gone - parts available!
89 Montero LS 3.0L/Auto [Blue/Blue] (2 of 2)
89 Conquest SHP
88 Conquest SHP
87 Dodge Raider 2.6L/Auto
91 Montero RS 3.0L/Auto

Others: 37 Lincoln
Page 1 of 3 1 2 3







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 16 (0.004s) Memory: 0.6420 MB (Peak: 0.7668 MB) Data Comp: Off Server Time: 2026-05-29 16:08:46 UTC
Valid HTML 5 and Valid CSS