Quote
Frank if you ever up your boost and need MLS headgaskets, I know of a couple good machine shops that will do a good job. I've sent 100's of 6G72 blown heads to them without issue! They are located between Fort Mill and Concord.


Thanks - I doubt I'll increase the boost on this truck - 8 is plenty if you get the cams right. I just need to find a good forged crankshaft so I can build the replacement engine. It should have plenty of useable power when I get the torque band set right.

That Ft. Mill-to-Concord area should be full of good machine shops since it's in the heart of Charlotte Motor Speedway country. I'll be attending a function at CMS on 9/11 and will probably see a lot of machine shop reps there. I might check with you on some of them.

Frank

'89 [color:"white"]G-Raider[color:"white"] [color:"black"]Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 172k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, Lifeline AGM, Rust-Oleum