cv shaft

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

cv shaft #962457 09/09/09 12:00 AM

Joined: May 2008

Posts: 30

Logan, Utah

kmattinson Offline

Getting the Wheeling Fever

I need to replace the left side cv axle shaft on my 90 isuzu tooper. I am having trouble trying to figure out which size to order. To what I understand there is a 9/16 shaft with smooth cylindrical inboard joint and there's an 11/16 with a ribbed inboard joint. My trooper has the 'J' on the vin code. So if anyone could help me with which one to order I would appreciate it.
Thanks,
Kyle

Entire Thread
Subject	Posted By	Posted
cv shaft	kmattinson	09/09/09 12:00 AM
Re: cv shaft	Craig	09/14/09 03:31 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.521s Queries: 15 (3.518s) Memory: 0.5942 MB (Peak: 0.6272 MB) Data Comp: Off Server Time: 2026-06-23 06:29:52 UTC
Valid HTML 5 and Valid CSS