I have a question on installing my Gen2 upper control arms.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Mitsubishi 4x4 and SUV Tech I have a question on installing my Gen2 upper control arms.

Print Thread

Rate Thread

Re: I have a question on installing my Gen2 upper control arms. [Re: vr4] #962602 09/22/09 07:43 PM

Joined: Mar 2003

Posts: 2,324

SLO County, CA 93453

KrzyDav

Body Damage is Cool

Done!
I didn't reindex , but for going higher I would diffenently recommed it.
I set mine at 3 3/4 inch measure on lower bumper pad, from metal to meta.
Anybody using Gen 1 brake hoses and Gen 2 mounts

dave h.
'89 Raider V6 5spd;Aisin Hubs;; Gen2 LS: frt. brakes, rear coils;U.C.arms;R.trailing arms;idler arm; rear LSD axle w.disc brakes ;2 battery system for Dog's fan; relocated ECU; custom bumpers;J.Baker receiver;Conferr roofrack; t-bar crank.

Entire Thread
Subject	Posted By	Posted
I have a question on installing my Gen2 upper control arms.	KrzyDav	09/09/09 10:53 PM
Re: I have a question on installing my Gen2 upper control arms.	StockRaider	09/09/09 11:58 PM
Re: I have a question on installing my Gen2 upper control arms.	powerRam50	09/10/09 12:06 AM
Re: I have a question on installing my Gen2 upper control arms.	Chief	09/10/09 02:32 AM
Re: I have a question on installing my Gen2 upper control arms.	StockRaider	09/10/09 02:53 AM
Re: I have a question on installing my Gen2 upper control arms.	1986powerram50	09/10/09 04:37 AM
Re: I have a question on installing my Gen2 upper control arms.	StockRaider	09/10/09 05:28 AM
Re: I have a question on installing my Gen2 upper control arms.	KrzyDav	09/10/09 06:28 AM
Re: I have a question on installing my Gen2 upper control arms.	Thoma_s	09/10/09 12:14 PM
Re: I have a question on installing my Gen2 upper control arms.	KrzyDav	09/11/09 07:29 AM
Re: I have a question on installing my Gen2 upper control arms.	Oyaji_Jon	09/11/09 07:53 AM
Re: I have a question on installing my Gen2 upper control arms.	KrzyDav	09/11/09 08:23 AM
Re: I have a question on installing my Gen2 upper control arms.	hazy_daze	09/11/09 03:55 PM
Re: I have a question on installing my Gen2 upper control arms.	Oyaji_Jon	09/11/09 04:02 PM
Re: I have a question on installing my Gen2 upper control arms.	zarktheshark	09/11/09 04:35 PM
Re: I have a question on installing my Gen2 upper control arms.	hazy_daze	09/11/09 04:46 PM
Re: I have a question on installing my Gen2 upper control arms.	KrzyDav	09/18/09 12:38 AM
Re: I have a question on installing my Gen2 upper control arms.	fasteddy	09/18/09 02:23 AM
Re: I have a question on installing my Gen2 upper control arms.	KrzyDav	09/19/09 10:37 PM
Re: I have a question on installing my Gen2 upper control arms.	vr4	09/20/09 12:02 AM
Re: I have a question on installing my Gen2 upper control arms.	KrzyDav	09/22/09 07:43 PM
Re: I have a question on installing my Gen2 upper control arms.	KrzyDav	09/24/09 03:55 AM
Re: I have a question on installing my Gen2 upper control arms.	haztoys	09/10/09 05:22 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.525s Queries: 16 (3.523s) Memory: 0.6464 MB (Peak: 0.6811 MB) Data Comp: Off Server Time: 2026-06-18 00:04:56 UTC
Valid HTML 5 and Valid CSS