Mechanical to Electric fuel pump questions

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Mechanical to Electric fuel pump questions [Re: fasteddy] #963724 09/18/09 03:02 AM

Joined: Jul 2004

Posts: 546

Tulsa, Ok

Jamez

Rock Warrior

I'm just looking for a stable psi/volume before I start trying to tune the carb.

I've been looking at relays and pumps, but the pumps don't have an amperage spec. Is there a typical amperage you need for a fuel pump? Is there a somewhat easy path to route the wire back to the tank? I'm guessing you just run a power wire and the pump itself is grounded to the chassis? Maybe not the case, but at least the ground wire I guess.

'87 Raider w/rebuilt 2.6
Weber 32/36

Entire Thread
Subject	Posted By	Posted
Mechanical to Electric fuel pump questions	Jamez	09/16/09 07:00 PM
Re: Mechanical to Electric fuel pump questions	FrankR	09/17/09 12:22 AM
Re: Mechanical to Electric fuel pump questions	Jamez	09/17/09 01:29 AM
Re: Mechanical to Electric fuel pump questions	FrankR	09/17/09 01:42 AM
Re: Mechanical to Electric fuel pump questions	fasteddy	09/17/09 01:56 AM
Re: Mechanical to Electric fuel pump questions	FrankR	09/17/09 03:31 AM
Re: Mechanical to Electric fuel pump questions	Shirebourn	09/17/09 11:26 PM
Re: Mechanical to Electric fuel pump questions	FrankR	09/17/09 11:36 PM
Re: Mechanical to Electric fuel pump questions	fasteddy	09/17/09 11:42 PM
Re: Mechanical to Electric fuel pump questions	Jamez	09/18/09 03:02 AM
Re: Mechanical to Electric fuel pump questions	FrankR	09/18/09 03:16 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: