Dead Fan Blower Motor

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Dead Fan Blower Motor [Re: shorepig] #963976 09/19/09 07:49 PM

Joined: Sep 2001

Posts: 8,557

Ocean Springs, MS

LandRaider Offline

Forum Moderator

It's Prob the motor. Usually the resistor packs only are in use on the lower speeds. MAX fan is straight 12 volts.

You can prob remove your blower, and free up the bearings, or put some new brushes in the motor. Not really much to go wrong.

87 Raider 4D56td v5MT1
31's..Basically Stock

Entire Thread
Subject	Posted By	Posted
Dead Fan Blower Motor	shorepig	09/19/09 06:53 PM
Re: Dead Fan Blower Motor	FrankR	09/19/09 07:42 PM
Re: Dead Fan Blower Motor	LandRaider	09/19/09 07:49 PM
Re: Dead Fan Blower Motor	KrzyDav	09/19/09 10:33 PM
Re: Dead Fan Blower Motor	plh	09/20/09 01:58 AM
Re: Dead Fan Blower Motor	shorepig	09/20/09 03:04 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.708s Queries: 16 (3.705s) Memory: 0.6040 MB (Peak: 0.6370 MB) Data Comp: Off Server Time: 2026-06-20 01:55:40 UTC
Valid HTML 5 and Valid CSS