Front Transfer case output u joint

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Front Transfer case output u joint #964015 09/19/09 11:41 PM

Joined: Jul 2008

Posts: 14

Calumet, Michigan, USA

UPRaider

Need a Spot

Hey guys,

I have an 89 Raider with the 2.6 and the 5 spd manual.

I did a SAS and am wondering if there is anyway to upgrade the front transfer case output u joint size. Right now, the u joint is soo small and it is my weak link. Are there any other t-cases out there that will bolt up to the mitsu 5 speed, or an upgrade as far as the front u joint at the transfer case?

Thanks guys

1989 Dodge Raider 2.6L
SAS with 33x12.50 MTR's

Entire Thread
Subject	Posted By	Posted
Front Transfer case output u joint	UPRaider	09/19/09 11:41 PM
Re: Front Transfer case output u joint	UPRaider	09/21/09 12:07 AM
Re: Front Transfer case output u joint	TOASTY	09/21/09 04:27 AM
Re: Front Transfer case output u joint	TOASTY	09/21/09 04:35 AM
Re: Front Transfer case output u joint	ES_97Sport	09/21/09 06:49 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.970s Queries: 15 (3.968s) Memory: 0.6013 MB (Peak: 0.6343 MB) Data Comp: Off Server Time: 2026-06-21 04:50:33 UTC
Valid HTML 5 and Valid CSS