Crank Sprocket Removal Problem

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Crank Sprocket Removal Problem [Re: keithminn] #964028 09/21/09 02:32 AM

Joined: Sep 2009

Posts: 3

Minnesota

keithminn

Need a Spot

The issue is the cogged gear that slips on the front end of crank shaft once the belt pulley is removed. The timing belt slips onto the cogged gear which has a key way and key. The front crank seal is behind the lower cogged timing gear. It stuck tight.

Entire Thread
Subject	Posted By	Posted
Crank Sprocket Removal Problem	keithminn	09/20/09 03:24 AM
Re: Crank Sprocket REmoval Probblem	BigSwede	09/20/09 03:37 AM
Re: Crank Sprocket REmoval Probblem	keithminn	09/20/09 04:06 AM
Re: Crank Sprocket REmoval Probblem	BigSwede	09/20/09 10:40 PM
Re: Crank Sprocket Removal Problem	keithminn	09/21/09 02:32 AM
Re: Crank Sprocket Removal Problem	kmattinson	09/21/09 06:48 AM
Re: Crank Sprocket Removal Problem	atfdmike	09/25/09 06:25 PM
Re: Crank Sprocket Removal Problem	callmemrv	10/10/09 09:46 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.523s Queries: 16 (3.521s) Memory: 0.6078 MB (Peak: 0.6408 MB) Data Comp: Off Server Time: 2026-06-19 22:25:53 UTC
Valid HTML 5 and Valid CSS