So this thread's been dead for a few months... (7?) finally getting back to working on the truck... got a bit done this weekend, engine on the stand, and.... i need quite a few more seals (argh). The kit i bought only does the top end... ONLY... back to toyota...
Anyways, since the dealership is closed on sundays, i decided to paint the valve covers. I used VHT Wrinkle Plus and (i think) they turned out great. Not perfect, but if you saw what i was starting with....
I sprayed tonnes of paint on them in thin coats, then baked in the oven at 200F for 20 minutes... came out like this:
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
Better than $200 for LCE covers. I should be updating more frequently now, weather is nice.

Cheers,
Greg <img src="/forums/images/graemlins/cheers.gif" alt="" />

89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim