Took 4 days to get this far because of interruptions, but took a month to perfect the design.

It's not completely finished yet, I still have to turn snap-ring grooves in the inner bore to hold the pilot bearing in place, but that has to wait till I can bolt the flywheel on and do a sanity check on the dimensions.



There's some visible chatter marks on the one face because of some resonance of the boring bar, but other than that it's well within tolerance, and everything should be good.

It's such an amazing feeling to hold something that 4 days earlier was just a cad drawing, and a few weeks earlier was just a vision in my minds eye.

Now to test it on the 616 and wait for my flywheel bolts to come in....