tranny bolts wont say tight

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: tranny bolts wont say tight [Re: piratepeg] #965261 09/27/09 04:55 AM

Joined: Feb 2000

Posts: 6,247

Bel Buckle, TN

4x4Wire

Trail Leader

That is part of the problem....

Fix the motor mounts and lock-tight the bolts.

If problems continue, you may have a drive shaft out of balance or u-joint issues.

John Stewart
Editor - 4x4Wire.com
Editor - 4x4Voice
Editor - MUIRNet-News
President - BlueRibbon Coalition

Entire Thread
Subject	Posted By	Posted
tranny bolts wont say tight	piratepeg	09/27/09 01:24 AM
Re: tranny bolts wont say tight	BigJim	09/27/09 01:49 AM
Re: tranny bolts wont say tight	piratepeg	09/27/09 03:49 AM
Re: tranny bolts wont say tight	4x4Wire	09/27/09 04:55 AM
Re: tranny bolts wont say tight	BigJim	09/27/09 05:36 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.588s Queries: 16 (3.585s) Memory: 0.6010 MB (Peak: 0.6340 MB) Data Comp: Off Server Time: 2026-06-05 03:47:36 UTC
Valid HTML 5 and Valid CSS