Quote
Just scored a full locking rear-end out of an SR which will be going into this rig. Will post project pics although I anticipate a direct bolt-in. <img src="/forums/images/graemlins/cheers.gif" alt="" />


Sweet! If the Deli truly is the same chassis as the GenI Montero, then it's easy peasy. The only issue you may run into is the driveshaft yoke/u-joint that's been noted by a couple folks that have done the swap. It's nothing that a competent driveline shop can't handle though. Good luck! <img src="/forums/images/graemlins/cheers.gif" alt="" />

Fasteddy's advice is occasionally sound...