Drive shaft?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Drive shaft? [Re: wytee] #965626 09/30/09 04:00 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Quote

I tried an 86 but the bolts are bigger. I thought they were the same generation but am i wrong?

Should all be 10m bolts, only the early 1st gen pickups had 8mm bolts on the drive shaft:
- http://www.4crawler.com/4x4/ForSale/DriveshaftSpacer.shtml#Introduction

Not hard to drill out the holes if needed.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Drive shaft?	wytee	09/30/09 01:30 AM
Re: Drive shaft?	4Crawler	09/30/09 02:21 AM
Re: Drive shaft?	wytee	09/30/09 03:37 AM
Re: Drive shaft?	4Crawler	09/30/09 04:00 AM
Re: Drive shaft?	Adam F	09/30/09 04:30 AM
Re: Drive shaft?	wytee	09/30/09 06:04 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.551s Queries: 16 (3.549s) Memory: 0.6034 MB (Peak: 0.6364 MB) Data Comp: Off Server Time: 2026-06-14 16:16:33 UTC
Valid HTML 5 and Valid CSS