Jon, that's where I was getting to.

Perfect explanation. I'll borrow it as a sticky on the other thread.

I didn't do these to make a quick buck.

I had to shell out over 1k to get these done because the shop would only cut a min amount of aluminum stock and setup the CNC machine for one long pass and then the hardware.

Will probably take quite a while to break even but at least I got what I wanted out of them and my lady loves the smoother ride, plus they get to go on other Monty's. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Just looking to recoup what I have in it and pass on the good savings. <img src="/forums/images/graemlins/cheers.gif" alt="" />

Thanks
Jesse