I've done that on both monty's since we've had them installed.

Threads are normal with no crushing or abbrasion. No bending or deformation.

The taper is so minimal that it does not affect the threads, nor the holes.

This is not a shear/side-load application.

It's a clamp-force application.

I'm getting repetitive and it's somewhat annoying.

This is not MY design.

These work. They are on who knows how many Montero's/Pajero's outside of the US. Maybe some people even bought them overseas and had them shipped here.

I'm done arguing over something I've been using for the past 3 years.

If you would like to pick up a set, by all means, do so. If not, no sweat off my sack. <img src="/forums/images/graemlins/butwiggle.gif" alt="" />

Jesse, if you want, you can send me the set you were sending to Alex. I'll install them with a write up and updates after road and trail use.