Snagging a GM 4.3 ecotec V6...

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Snagging a GM 4.3 ecotec V6... [Re: sportagebandit] #966782 10/09/09 03:27 AM

Joined: Mar 2002

Posts: 1,396

Utah

DennisThompson Offline

Body Damage is Cool

If you went with a 700R4 and a tcase out of a pre IFS Chevy K10 or Blazer the front tcase output is on the right side just like the Kia. With a 4.3 that would be a wicked combo.

Keep us posted, Dennis

95 Sportage, gone but not forgotten.
98 Jeep TJ, 4" Zone springs with RC Long arms, Ford 8.8", 4.56 gears & Detroit locker rear, D30, 4.56 & Detroit Trutrack front.

Entire Thread
Subject	Posted By	Posted
Snagging a GM 4.3 ecotec V6...	SKC	10/07/09 07:20 AM
Re: Snagging a GM 4.3 ecotec V6...	DamKia	10/07/09 04:26 PM
Re: Snagging a GM 4.3 ecotec V6...	SKC	10/07/09 06:07 PM
Re: Snagging a GM 4.3 ecotec V6...	SKC	10/08/09 12:02 AM
Re: Snagging a GM 4.3 ecotec V6...	DamKia	10/08/09 12:28 AM
Re: Snagging a GM 4.3 ecotec V6...	sportagebandit	10/08/09 07:37 PM
Re: Snagging a GM 4.3 ecotec V6...	DennisThompson	10/09/09 03:27 AM
Re: Snagging a GM 4.3 ecotec V6...	SKC	10/11/09 09:37 PM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.207s Queries: 16 (3.494s) Memory: 0.6087 MB (Peak: 0.6417 MB) Data Comp: Off Server Time: 2026-06-06 23:37:43 UTC
Valid HTML 5 and Valid CSS