Swapping from 4.62s to 4.88s

Print Thread

Rate Thread

Re: Swapping from 4.62s to 4.88s [Re: brnt2180] #967414 10/12/09 03:17 AM

Joined: Aug 2007

Posts: 181

Charlotte,NC

ncdieselwrench Offline

Wheeler

So far you shopping list looks like prussian blue and some silicone. Not bad you should be able to get it from NAPA no prob.

1993 Chevy Suburban 2500- Tow Rig

1991 Mitsubishi Montero LS LWB

SR Parts:
Rear Axle
Coils
Trailing Arms
Front Calipers
and soon to have UCA's and idler arm.
Dual Bouncies
Air Lift Airbags
Aisins
33x12.50x15 Custom Grooved TSL's

Body lift in the near future.

Entire Thread
Subject	Posted By	Posted
Swapping from 4.62s to 4.88s	DRaider90	10/12/09 02:25 AM
Re: Swapping from 4.62s to 4.88s	1986powerram50	10/12/09 02:32 AM
Re: Swapping from 4.62s to 4.88s	brnt2180	10/12/09 02:52 AM
Re: Swapping from 4.62s to 4.88s	ncdieselwrench	10/12/09 03:17 AM
Re: Swapping from 4.62s to 4.88s	brnt2180	10/12/09 03:31 AM
Re: Swapping from 4.62s to 4.88s	LandRaider	10/12/09 03:39 AM
Re: Swapping from 4.62s to 4.88s	0778drz110	10/12/09 03:50 AM
Re: Swapping from 4.62s to 4.88s	Mad_Scientist	10/12/09 03:50 AM
Re: Swapping from 4.62s to 4.88s	DRaider90	10/12/09 04:06 AM
Re: Swapping from 4.62s to 4.88s	Mad_Scientist	10/12/09 10:49 AM
Re: Swapping from 4.62s to 4.88s	StockRaider	10/12/09 12:00 PM
Re: Swapping from 4.62s to 4.88s	0778drz110	10/12/09 08:24 PM
Re: Swapping from 4.62s to 4.88s	Mad_Scientist	10/12/09 08:27 PM
Re: Swapping from 4.62s to 4.88s	brubren3815	10/13/09 11:49 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: