2nd Gen Heater core removal?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2nd Gen Heater core removal? [Re: 4runnerpilot] #967494 10/13/09 08:54 PM

Joined: Apr 2004

Posts: 448

Seattle, WA

jdavis

Mudrunner

I wouldn't say that a ton of air is pushed out of mine either but the air that does come out is super hot. Once the truck is warmed up, the heat gets turned halfway down and the fan is set to the slowest speed and sometimes off.

Check out the Mitsubishi Tech: Reference Thread page. In the first thread there is a link to the factory Service Manual.

~ Jon

95 Montero SR
33 x 12.50
Aussie Locker
OME Heavy Duty Coils & Torsion Bars
ARB Front Bumper
76" Trail Gear Rock Sliders
XRC-9.5K Winch

Entire Thread
Subject	Posted By	Posted
2nd Gen Heater core removal?	4runnerpilot	10/13/09 06:35 AM
Re: 2nd Gen Heater core removal?	jdavis	10/13/09 08:54 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.544s Queries: 16 (3.542s) Memory: 0.5947 MB (Peak: 0.6277 MB) Data Comp: Off Server Time: 2026-06-07 16:04:20 UTC
Valid HTML 5 and Valid CSS