|
|
|
|
 High Beam Switch
#968233
10/16/09 05:44 AM
|
Joined: Jan 2009
Posts: 10
OP
Need a Spot
|
My high beam switch seems to not be working... any ideas?
Regular headlights work fine. If I pull the lever backwards the high beams will temporarily illuminate as normal. However, if I am on normal headlights and push the lever forward for high beams, I get no headlights at all. Total darkness.
What should I check first?
Thx
|
|
|
Re: High Beam Switch
[Re: FJR]
#968234
10/16/09 06:09 AM
|
Joined: Oct 2002
Posts: 15,887
Toyota & Classifieds Moderator
|
Make sure the headlight relay is working first; what's also common on Toys is the contacts for the switch get worn or dirty; that would be your next thing to check.
http://www.walkablecommunities.org/Democracy is two wolves and a lamb voting on what to have for dinner. Liberty is a well-armed lamb contesting the vote. **ubi apis- ibi salus**
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5845 MB (Peak: 0.6324 MB) Data Comp: Off Server Time: 2026-06-17 15:28:36 UTCValid HTML 5 and Valid CSS 
