High Beam Switch

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

High Beam Switch #968233 10/16/09 05:44 AM

Joined: Jan 2009

Posts: 10

FJR

Need a Spot

My high beam switch seems to not be working... any ideas?

Regular headlights work fine. If I pull the lever backwards the high beams will temporarily illuminate as normal. However, if I am on normal headlights and push the lever forward for high beams, I get no headlights at all. Total darkness.

What should I check first?

Thx

Entire Thread
Subject	Posted By	Posted
High Beam Switch	FJR	10/16/09 05:44 AM
Re: High Beam Switch	kewlynx	10/16/09 06:09 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.541s Queries: 15 (3.488s) Memory: 0.5939 MB (Peak: 0.6269 MB) Data Comp: Off Server Time: 2026-06-20 01:52:22 UTC
Valid HTML 5 and Valid CSS