Quote
I can make a bubble flare to hold the hose clamp and not tear the tube. I clamp the tube in the flaring tool, with about 3/8" protruding (adjust for tube diameter) and whang it with a hammer in an axial direction, which bulges the tube above the flaring clamp enough to hold a clamp.


Nice <img src="/forums/images/graemlins/kewl.gif" alt="" /> I'll try that <img src="/forums/images/graemlins/cheers.gif" alt="" />

'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...