Frame change

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Frame change [Re: shovelhead] #969463 10/26/09 03:50 AM

Joined: Aug 2003

Posts: 2,854

Toronto, Canada

Greg_Canada Offline

Roll Me Over

The 97 4runner auto 3.4 i got my donor for my engine swap (to 5spd) was machined for it.
I dont see why they would not have done it, why make 2 different crankshafts when everything else is the same?

89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim

Entire Thread
Subject	Posted By	Posted
Frame change	shovelhead	10/25/09 12:24 PM
Re: Frame change	Greg_Canada	10/26/09 03:50 AM
Re: Frame change	shovelhead	10/26/09 11:39 PM
Re: Frame change	Greg_Canada	10/27/09 07:28 PM
Re: Frame change	shovelhead	10/28/09 12:40 AM

Moderated by 4x4Wire, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.183s Queries: 16 (4.180s) Memory: 0.5996 MB (Peak: 0.6326 MB) Data Comp: Off Server Time: 2026-10-22 08:05:37 UTC
Valid HTML 5 and Valid CSS